---------------------- multipart/mixed attachment Here isthe support I use, baught it ready from Jahnn's it hold in a standard bench with sware tubing as vertical supports. Tails and shanks are then worked at the same time (and finish perfetly aligned. And no I did not file along the pencil lines, this rounding based on the hammer shank as a center does not check so well in my opinion, the center of the arc is lower than the shank or not it ? best . Isaac OLEG ---------------------- multipart/mixed attachment A non-text attachment was scrubbed... Name: EPSN0006#1.jpg Type: image/jpeg Size: 60417 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/6f/2c/0e/e7/EPSN00061.jpg ---------------------- multipart/mixed attachment _______________________________________________ Files list info: http://ptg.org/mailman/listinfo/files ---------------------- multipart/mixed attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC