what is downbearing?

JIMRPT@aol.com JIMRPT@aol.com
Fri, 20 Feb 2004 20:18:13 EST


In a message dated 2/20/04 2:23:37 PM Eastern Standard Time, 
dgilmore@kcmpi.net writes:

<< For example, a change from 5 degrees to 10 degrees almost doubles the
 downbearing force.  In contrast, a change from 80 to 85 degrees only
 increases the force by about 1%. >>
Don.... I agree with you ...........but I was speaking of angles that we 
would typically find in a piano...although I have worked on a few that while 
tuning it felt like I was working against an 85 deg angle!! :-)
Jim Bryant (FL)

This PTG archive page provided courtesy of Moy Piano Service, LLC