This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hello List Since this is a generally hot debate (we need something hot - = considering the weather!) I would like to go a little further and debate = the issue: Does the panel think the holes should be reamed out before = inserting the new pins.=20 Issue 1: the reamer will break down the old glazed surface and prepare = the hole for the new pin.=20 Issue 2: what size reamer for what size pin?=20 Issue 3: Should the reamer be a tapered one to allow a tightening = characteristic for the replacement pin? Over to you. The cold is coming to the Sussex Downlands (so they say) Michael G (UK) ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/a9/71/78/2b/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC