doweling a butt joint

[James Grebe]

a pocket hole
James Grebe
Piano-Forte Tuning & Repair
Artisan of Wood
WWW.JamesGrebe.com
1526 Raspberry Lane
Arnold, MO 63010
pianoman@accessus.net
----- Original Message ----- 
From: "David Love" <davidlovepianos@earthlink.net>
To: "Pianotech" <pianotech@ptg.org>
Sent: Saturday, July 24, 2004 9:48 AM
Subject: doweling a butt joint


> I've seen two methods of doweling a butt joint.  One is to drill
diagonally
> from one piece to the other and insert the dowel, the other is to drill
> straight down the through the seam so that 1/2 the circumference of the
> dowel is located on each piece.  Which is better?
>
>
> David Love
> davidlovepianos@earthlink.net
>
>
>
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives
>