This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Anyone have any slick methods for arcing hammer tails on a set that are = already mounted on their shanks? I have, use, and like the Spurlock tail = arcing jig, but the hammer/shank assembly will not fit into the jig.=20 This work is being done on an older good condition Baldwin grand action = that someone installed new hammers a few years ago, but did not arc the = tails. They are kinda squared-off. They do not check well and they are = attacking the new backchecks. The piano owner is not interested in a new = action, but rather to just try and make this one work reasonably well. Thanks for any suggestions. Terry Farrell ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/45/7c/20/11/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC