This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment I think the tail works best at 1" and functions best when at the point of let-off the bottom of the tail is about 1 mm above the top of the backcheck. David Love davidlovepianos@comcast.net -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf Of Joe Garrett Sent: Wednesday, November 03, 2004 11:29 AM To: pianotech Subject: Re: Back To Pianos I forgot to ask: How do you determine the length of the hammer tail needed. As I'm putting new backchecks on new keys, this is an item of concern. BTW, I made a tool for quickly checking the backcheck angle and the distance between the tail and the check, in the "drop" position.<G> Any and all help, greatly appreciated. Gosh, I'm having fun!<G> Best Regards, Joe Garrett, R.P.T. Captain, Tool Police Squares R I ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/c9/a6/16/ff/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC