---------------------- multipart/alternative attachment In a message dated 11/12/2004 6:15:04 PM Eastern Standard Time, alanforsyth@fortune4.fsnet.co.uk writes: > multiply 200 pounds of torque > > Greetings, I thought that each string's pulling impacts the plate at about 10 to15 lbs each so say cumulatively; 12 lbs x 240 strings = 2880 lbs extra pulling on the plate that wasn't there before you did the tuning. When you say torque, do you mean the ft-lbs of work you do, to turn the pins? ..or the work pounds difference from before the tuning of the piano to after the tuning on the plate? Does anyone have the figures on this? Julia Reading, PA ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/8a/d8/95/fd/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC