---------------------- multipart/mixed attachment Get a small pair of end nippers and grind them down to a width which will fit into the wippen slot. <jpg attached> For the ones which have not broken, side cutters will nip off the bulk and then the narrow end nippers will remove the rest. Do all of them, otherwise it'll cost more in the long run to spot replace; not to mention the aggravation. Grip the sticker with Vise-Grips at the end of the old elbow and nip off the plastic with cutters. Screw on the new plastic elbow to the Vise-Grips and clip the elbow in place. It should take no more than 1.5 hrs. Regards, Jon Page, piano technician Harwich Port, Cape Cod, Mass. mailto:jonpage@comcast.net ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ---------------------- multipart/mixed attachment A non-text attachment was scrubbed... Name: elbow nipper.jpg Type: image/jpeg Size: 37900 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/b5/38/74/0d/elbownipper.jpg ---------------------- multipart/mixed attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC