>At 08:14 AM 11/17/04 -0700, Phil wrote: > >>As soon as my desire for information becomes stronger than my >>resistance to paying $160 for a torque measuring screwdriver I'll >>measure some torques myself. If so I'll report back. > >A screwdriver bit for a pinblock torque wrench is probably under >$10. Wouldn't that work for this purpose? > > John Hi John, The torque wrench I use for pinblocks is in the 20 - 200 in.-lb range. What I need for this is one in the 2 - 20 in.-lb range. Phil Ford
This PTG archive page provided courtesy of Moy Piano Service, LLC