This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Starrett 7" Wire Cutters like new condition in the box Page 51 Schaff No.225B Schaff No. 192 Hammer head and butt boring jig.=20 Page 45 in their cat. Contact me off list please: rsnelson0984@mchsi.com Richard Oliver Snelson Oliver Piano Service ----- Original Message -----=20 From: Quentin Codevelle=20 To: pianotech=20 Sent: Sunday, November 21, 2004 10:12 AM Subject: keyboard levelling Hi everybody, I wonder what kind of device you use for levelling keys. I use the aluminium yamaha straight edge which is very handy and = practical. But I've noticed that it is not as straight as it was when new. It has warped a little since I bought it. So I'm considering in buying a new one. Or is there a way to accurately make one that will harldy warp or = loose its "straightness"? A guy I know who went to the Yamaha Academy in Japan told me that they = were selling another type of straight edge there. It consists of a wooden core, and two plexiglas bars glued to the = wooden core (making sort of a "wood & plexi" sandwich). And then it is calibrated with a machine so it is straight. Maybe there is a way to build the same edge with good accuracy. Thanks, Quentin ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/9c/67/92/58/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC