This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hi joe, What do you call the heavy wire tool? When I want to lift a short section of keys to insert some split = punchings, I use an upright hammer shank (or another piece of wood, not = too long) , so that the keys that must remain in an up position can be = blocked with the shank. Then, after I inserted the punchings I remove the hammer shank, and I = check my levelling. I had understood that your tool wasn't intended for touch up keyboard = regulation. What do you call a "spacer"? I've seen your voicing tray on your website but i couldn't figure out = what it is on the picture. Quentin ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/c4/d3/08/9f/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC