Replacing upright jack springs

Ron Nossaman rnossaman@cox.net
Wed, 13 Oct 2004 16:50:00 -0500


>Yes, there is, Cy.
>
>Undo the bridle strap, remove the keyarm related to that wippen and the 
>two neighbor keyarms as well.
>
>After doing that, you'll find on older uprights (in most instances), the 
>wippen drops down far enough to use the special reamer made just for 
>cleaning out the hole.
>
>Keith

It also drops down far enough to bend the spoon out if you get too 
aggressive with the reamer. So pay attention.

Ron N


This PTG archive page provided courtesy of Moy Piano Service, LLC