---------------------- multipart/alternative attachment Sure didn't look like it... and some of the felts were shabby looking. -------------- Original message from David Ilvedson : -------------- That couldn't have been factory work...? David Ilvedson ----- Original message ----------------------------------------> From: <richard.ucci@att.net> To: <pianotech@ptg.org> Received: Sat, 16 Oct 2004 13:02:02 +0000 Subject: m-450 Hi List, I went back and did the leveling on that Yamaha m-450. I was surprised to find as many as ten or more punchings under some keys at the balance rail. Set the height at 60mm top of key from keybed and all is well. Dip worked out to be about 9.5mm but still felt good. talk to ya later, Rick Ucci/Ucci Piano ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/43/c2/73/90/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC