---------------------- multipart/alternative attachment In a message dated 10/17/2004 6:01:48 PM Pacific Standard Time, i1ex@earthlink.net writes: the keys are horrendously tight - it takes a two-handed effort to pull them off the balance rail Be sure to clean the pins before easing @ the bottom balance rail hole. Sometimes a greasy substance will come off, causing you to need less easing. You might even make one pass through the hole with a pipe cleaner dipped denatured alcohol (sometimes sold as shellac thinner). Let them dry, then try the fit again. Is most of the tightness at the hole, or the bushing? Bob ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/18/78/fa/9b/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC