This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment YES YES YES. GRRRRR! have not gotten around to complaining to schafft about that one. -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On Behalf Of Alpha88x@aol.com Sent: Thursday, September 23, 2004 12:44 PM To: pianotech@ptg.org Subject: Spoon bender Greetings, Does anyone have trouble with the spoon bending tool to be flimsy? I am finding that when I reach back there in the action to bend the spoon with the thing, I feel something giving way and bending, only to remove the tool and see that IT ( the tool) bent!!!!! Also, does anyone have suggestions on how to get all the bends equal. In 2003 I went to the eastern PTG convention in Pittsburgh, and a gal, (I think it was Karen Cleveland) gave a damper class where she had this really cool trick of using a cable/construction tie to hold the damper rod back while adjusting either the spoons or the wires. I walked in late in the classroom and didnt fully get the whole thing. Is anyone familiar with this method and can breifly explain it? Julia Reading, PA ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/1b/67/9f/4c/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC