Hi Phil, I've worried a little about the same thing. A good idea. Thanks. Avery At 07:08 PM 3/31/05, you wrote: >but perhaps a way to prevent you from buying a new carpet in a client's home. > >I work with my fair share of Asian hammers, and most of them benefit >greatly from steam voicing..not alot..just enough to take that clangy edge >off of them. > >Before I made this up today, I was always fearful of the hammer falling >off to the side and burning a hole in the client's carpet. I don't like >keeping it on the piano itself, so on the floor it goes. > >Parts used: > >-scrap plywood >-1 iron stand >-6 Dampp-Chaser screws >-1 small leaf spring >-2 pieces of backrail cloth >-a once-over with some flat black spray paint..and wahla..an iron stand. > >-Phil Bondi(Fl) > > > > > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC