This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment John Ross said: "I use a spot of glue. I have run across too many, that the cork has fallen out. I don't mean surround the hole with glue, too much is a problem to =3D remove. I agree with John, here. I insert the corks, first, then I put one drop, = on the left & right of each cork, of 50/50 cold hide glue/water. This is = sufficient. Anything more is way overkill. However, there is a lot more = pulling force on the bridle strap, (if it is regulated properly), than = one would think.<G> Without the glue the darned things DO come loose! = DAMHIK Regards, Joe Garrett, R.P.T. Captain, Tool Police Squares R I ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/f7/64/a5/c6/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC