waxbuildup

Conrad Hoffsommer hoffsoco@luther.edu
Mon, 25 Apr 2005 07:28:46 -0500


At 07:18 4/25/2005, you wrote:
>Good point, Wayne.  I wasn't aware that Yamaha had plastic cheek blocks 
>and other parts.  Most high gloss pianos get a coating of cooking residue 
>if they're near the kitchen or in a bar.  A solvent like naptha is needed 
>to remove it, more easily done than with a polish alone.
>Paul McCloud
>San Diego
>
>----- Original Message -----
>From: <mailto:wayne.w@musicstop.com>Wayne Walker
>To: <mailto:pianotech@ptg.org>pianotech@ptg.org
>Sent: 04/25/2005 5:01:38 AM
>Subject: Re:waxbuildup
>
>Acetone will not harm polyester, but some pianos such as Yamaha's have 
>parts that are not polyester but plastic. As soon as the acetone hit the 
>plastic, game over, the surface dissolves. When the acetone dries the 
>surface is rough and uneven. I know I had this happen to me last year on a 
>Yamaha cheek block.Try a body shop supply store for wax remover. They 
>would be able to help you with selecting the right product safe for 
>plastic and polyester.
>
>Wayne Walker
>
>
>I sit corrected, clarified and elucidated.  After some DAMHIKs, the only
>reason I want acetone nearby is for emergency CA solvency...
>
> > > Poly is plastic - keytops is plastic - acetone and keytop mixture can 
> be used to rockify hammers.
> > > Still wanna try on the finish?
> > > Conrad Hoffsommer


So I guess I'm right to be paranoid ???



Conrad Hoffsommer
Decorah, IA

Washlesky's Law - Anything is easier to take apart than to put together.
Rudnicki's Rule - That which cannot be taken apart will fall apart.
-Murphy's Law(R) Calendar


This PTG archive page provided courtesy of Moy Piano Service, LLC