Hi Terry, The VTcan fit in the end, on end, it leaves over 8" for other stuff. Remember, there is a wool strip, and the edges of the quilted dividers, have velcro, so you can customize it. It is after all for cameras and lenses. I could put a VT in it and move some compartments around and take a photo, if you want, probably not till tomorrow. I like it, it is fully adaptable, and tough. I went through 2 camera bags before this. Inside is 13"X6" and 8" high. The top has an inside pocket full length, and an outside pocket with a pocket in it. Front pocket 2" X 14" for tuning hammers and long stuff, it also has an extra zippered pocket. Two side pockets to slide stuff in, stretchy nylon mesh. John M. Ross Windsor, Nova Scotia, Canada jrpiano@win.eastlink.ca ----- Original Message ----- From: "Terry" <terry@farrellpiano.com> To: "Pianotech" <pianotech@ptg.org> Sent: Tuesday, February 01, 2005 1:47 PM Subject: Re: Veto pro pac tool bag >I looked at your bag John, however, I am looking for something with lots of > little tool pockets like theVetopropac, but with a place for the > Verituner. > > Terry Farrell > > >> The VT, or SAT, will fit in the bag I mentioned, as the compartments can > be >> changed on a Velcro rail. The dividers are padded. >> I had tried larger camera bags before, but they fell apart. The Lowpro >> bag >> is on it's 4th year now. The outside material is strong and waterproof. > Lots >> of zippered compartments as well. >> >> John M. Ross >> > >> > This looks like a very interesting bag. I like the lots of pockets for >> > tools. But where would I put my Verituner? I have been using the case > that >> > came with my SAT I for years now and it had gotten quite heavy. I'm > using >> > a >> > small plastic tool box in a trial effort with a small box to see how >> > few >> > tools I can get by with in my "everyday" tool bag. I don't mind walking >> > out >> > to the car to get another tool if needed. I had found that I carried > many >> > tools in the SAT case that I rarely used. >> > >> > IMHO, the XL size would be WAY too big (I could put 80 lbs of tools in >> > there!). Does anyone know of a good case that has lots of pockets for >> > tools >> > (like this Vetopropac) and has space for a Verituner (and not so > terribly >> > big)? >> > >> > Terry Farrell >> > >> > >> >> I spend too much time digging for tools, and would >> >> like to get a new case/box/bag/other. >> >> >> >> Is anyone using the Vetopropac vertical tool storage >> >> bag, either the LC or XL size? >> >> >> >> Their website: http://www.vetopropac.com/home.html >> >> >> >> Greg Graham > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC