snappy tuning pins

[Michael Gamble]

Hello Guy and List
I have this snappy problem on an old S&S A - like o.l.d. - elephant legs... 
the lot. Do you think you could explain how you "apply" as in when you said:
>For snappy or uneven pins, I've had success with a VERY thin solution of 
>Garfields Pin Block Restorer. Instead of 50/50 >alcohol to resin, I use a 
>10% solution, and apply it sparingly.
Do you remove the wrest-pins or just dribble the stuff at the point of entry 
into the pin block?
Regards from a dark Sussex-on-Sea
Michael G.(UK)