"Screwed"

[Don]

Hi Sarah,

You could have one made at a machine shop--it would be pricey however. I
prefer your drill out idea personally.

At 12:37 PM 2/26/2005 -0500, you wrote:
>   Hi all,     This is the one that they didn't bend:              Any
>help/leads would be greatly  appreciated!   Short of that, I'll probably be
>drilling out,  epoxying threads in place, and using machine screws.  
>Peace, Sarah      They're usually much more  professional than that. 
>Attachment Converted: "c:\eudora\attach\lyre screw.jpg" No virus found in
>this incoming message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus
>Database: 266.5.0 - Release Date: 2/25/2005 



-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 266.5.0 - Release Date: 2/25/2005