Just curious (nosy). What did you lose in the bet? :-) Avery At 06:05 AM 2/28/05, you wrote: >Hi All. > >I lost a bet to a well-respected tech dealing with my first agraffe >removal. He suggested the 'tap' method, but just for insurance purposes, >he suggested I purchase a reverse drill bit (7/32 I believe), which I did. > >Procedure: > >-Using an awl, tap a tiny hole in the broken agraffe..just enough for the >drill bit to catch it. >-Insert the drill bit (inserted in a drill..cordless preferred) and slowly >turn that drill bit. >-as soon as the drill bit catches that hole, the broken agraffe will spin >right out. > >I suspect the 'tap' method without using the reverse drill bit will work >just fine, as many have suggested here..I just haven't had my 2nd chance yet! > >I went from sweating bullets to hero in about 5 seconds..and I still need >to pay up on that bet..!!! > >-Phil Bondi(Fl) > > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC