How to remove small bulges in the veneer?

BUNKYPIANO@aol.com BUNKYPIANO@aol.com
Sat, 15 Jan 2005 09:35:52 EST


---------------------- multipart/alternative attachment
While clamping and gluing will produce the best results (use wax paper), or 
newspaper if you are stripping and finishing and have to sand it anyway...you 
may also apply an iron and achieve very good results...all methods will require 
a bit of refinishing knowledge...  on curved surfaces and smaller bubbles, 
the iron works great, and oh by the way, you can use elmers glue!
tom mc nabb

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/bc/9b/d0/7d/attachment.htm

---------------------- multipart/alternative attachment--

This PTG archive page provided courtesy of Moy Piano Service, LLC