This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment The problem is that I don't want to damage the veneer in any way. Would = it work if I just opress it with a hot iron? Maybe with a damp cloth too at first? Calin Tantareanu ---------------------------------------------------- http://calintantareanu.tripod.com ---------------------------------------------------- ----- Original Message -----=20 From: BUNKYPIANO@aol.com=20 To: pianotech@ptg.org=20 Sent: Saturday, January 15, 2005 4:35 PM Subject: Re: How to remove small bulges in the veneer? While clamping and gluing will produce the best results (use wax = paper), or newspaper if you are stripping and finishing and have to sand = it anyway...you may also apply an iron and achieve very good = results...all methods will require a bit of refinishing knowledge... on = curved surfaces and smaller bubbles, the iron works great, and oh by the = way, you can use elmers glue! tom mc nabb ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/3b/30/7c/8a/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC