This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hello John Ross and List The "arbour" or "arbor" has another name too - a "false nose!". It has a = coarse tapered left hand thread at the business end and a 5/8" hole at = the other. It is kept in place by one or two grub screws. Is that what = were talking about? Regards=20 Michael G.(UK) ----- Original Message -----=20 From: John Ross=20 To: Pianotech=20 Sent: Tuesday, March 08, 2005 12:18 AM Subject: Re: Moulded Keytops, problems buffing Hi Terry, You had previously mentioned an arbour, is this something you = assembled, or bought? The Shopsmith table is too high, to be used with this, as I am = visualizing this. What do you use as a table. Would it be possible to send a picture of your setup? Thanks, John John M. Ross Windsor, Nova Scotia, Canada jrpiano@win.eastlink.ca ----- Original Message -----=20 From: Terry=20 To: Pianotech=20 Sent: Monday, March 07, 2005 7:45 PM Subject: Re: Moulded Keytops, problems buffing I just buffed a set of plastic keys today on my ShopSmith. I slowed = the ShopSmith down to the "jigsaw" setting (almost the slowest setting - = a wild guess might be 500 rpm - maybe a bit more). I used an unsewn = buffing wheel. I used red rouge on the nastiest scratches and marks - = the red rouge is aggressive and leaves a fine scratch pattern. Then I = hit them all with white rouge on a similar buffing wheel and they all = polished up bright and shiny in just a few seconds for each key. Terry Farrell On 3/6/05 John Ross wrote: >>Joe had mentioned problems buffing. I also have problems in this area. I had thought on a softer buffing wheel, but have been unable to = find a source. The selections available at my suppliers, are limited.=20 Any ideas? I had thought on slowing the wheel down. Would that help? John M. Ross<< ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/be/7b/31/18/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC