This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment John, Check the pivot pin where it goes through the unicorda lever. I've seen = a mis-drilled situation where the pin was pivoting in the lever, instead = of on the lever mount bushings. Lube the pivot bushings with VJ. If the = pin is loose in the lever, a slight peening will make it tight. Also, = try lubing the keybed at the glide points. Best Regards, Joe Garrett, R.P.T. Captain, Tool Police Squares R I ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/f0/18/36/5f/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC