This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment On the upside, the piano is in my store. I never do shop work in their = home. I always move the piano. Ron ----- Original Message -----=20 From: John Ross=20 To: Pianotech=20 Sent: Saturday, May 14, 2005 2:29 PM Subject: Re: split bridge How about, countersinking a wood screw. It can be left in, after the = epoxy dries. That way you won't have to wait, or return after the epoxy dries. John M. Ross Windsor, Nova Scotia, Canada jrpiano@win.eastlink.ca ----- Original Message -----=20 From: Ron & Lorene Shiflet=20 To: Piano-Tech=20 Sent: Saturday, May 14, 2005 5:59 PM Subject: split bridge I have a Baldwin Acrosonic here with a bridge that is separating. = The separation is in the high treble only. The customer doesn't have a = lot of money and re-capping the bridge is beyond the value of the piano. = I was thinking about removing the strings from hitch pins and getting = under the bridge with epoxy. In the past, while the epoxy cures, I've = used the "2 Pieces of Pinblock" method for clamping down the bridge. = Does anyone have a better method? Any ideas or alternate methods would = be appreciated. =20 thanks Ron ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/a8/6a/b8/42/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC