This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment I don't understand how/where your bridge is separating - and from what. = You mention getting under the bridge with epoxy - sounds like bridge = root is separating from panel - but then you address recapping the = bridge - what has that got to do with the other? Please explain details a bit more if you can. Terry Farrell I have a Baldwin Acrosonic here with a bridge that is separating. The = separation is in the high treble only. The customer doesn't have a lot = of money and re-capping the bridge is beyond the value of the piano. I = was thinking about removing the strings from hitch pins and getting = under the bridge with epoxy. In the past, while the epoxy cures, I've = used the "2 Pieces of Pinblock" method for clamping down the bridge. = Does anyone have a better method? Any ideas or alternate methods would = be appreciated. =20 thanks Ron ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/14/01/a2/0c/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC