Tom, Try Shaff #590 on page 107. They might need to be modified a bit, but are very close. Had the same problem with weak whippen flanges on my 1911 Chickering. Doug Knabe Dallas Thomas Cole wrote: > I'm rewhatevering a 1911 Chickering grand which has brass flanges for > hammers and wips. The hammer flanges are beefy and holding up well, > but the wippens are starting to break a few tongues at the notch for > the center pin. About a dozen are no longer able to hold the center > pin tightly. Anybody have some to spare? Better ideas for repair? > > Tom Cole > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC