---------------------- multipart/alternative attachment David/Barbara, I tried that and only got one hit. For this particular thing, I had better luck using "pitmans" or "pitman". Avery At 05:42 PM 5/16/05, you wrote: >Barbara - > >Look up "Floating Pitman". > >David Skolnik > >At 04:12 PM 5/16/2005 -0500, you wrote: >>Hi list, >> >>Anyway, speaking of damper systems and trapwork--when I first started in >>the business, I was told by John Ford (!), to remove the pitman, drill a >>little hole in the end to insert a center pin (a small bit of the sharp >>side protruding). This would keep the pitman in place and eliminate >>noise. Since I've come back to work, I've read that folks make the hole >>in the keybed larger. So, is it a toss up, or did I horribly damage all >>those pianos where I inserted the center pin? >> >> >>Anxiously awaiting enlightenment! :-) >> >>Barbara Richmond ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/5c/07/50/e8/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC