This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Subject: split bridge List,=20 <SNIP> As I tried to screw down the bridge top, It kept = splitting. <SNIP> Ron =20 Ron, You mentioned predrilling. The hole drilled in the bridge cap must = be slightly larger than the shank of the screw. Countersink to hide the screw head.=20 You want the screw to pass through the cap freely and thread into = a pilot hole drilled into the bridge root that is slightly smaller than = to o.d. of the threads. The harder the wood ,the closer the hole size = to screw diameter . I'm guessing that the threads engaged the cap and pushed it apart. = The only other way the cap would split with a screw would be if = you torqued it down too much at the end. I guess it worked out anyway. Best wishes, Tom Driscoll RPT ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/cb/26/08/d9/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC