I'm sending along 2 pictures of the F1 keystick, B 342631. Note the 7 original key leads, and the non-original leather key bushings. But why I'm writing is the interesting location of the wear in the key bushing from contact with the front rail pin. The whole set of keys is similar, and under certain circumstances the front rail pins do indeed bind on the front of the mortise. (This explains a few things!) Any ideas out there with regard to what happened? It looks like the mortise is in the wrong place by just over 1/16". Anything else to watch out for? I know, I know -- watch for _everything_. But it probably is just the mortise in the wrong place, right? Kent Photos at: http://tinyurl.com/cyygq http://tinyurl.com/ao697 Direct ptg.org URLs: https://www.moypiano.com/ptg/files/attachments/01/b9/bc/70/DSCN1071.jpg https://www.moypiano.com/ptg/files/attachments/fa/4b/57/a0/DSCN1075.jpg
This PTG archive page provided courtesy of Moy Piano Service, LLC