This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment http://www.spurlocktools.com/id21.htm Works great. Less distortion. Terry Farrell ----- Original Message -----=20 Having just returned from Italy, Lake Garda (wonderful - included = Verona and Venezia) and Norfolk (delightful - I can also gaze out at the = North Sea and wave to Andre Oorebeek in Holland) I am back in harness = and doing my school rounds of 8-9 pianos per day. Meanwhile on the = workshop front I've got to the stage in my S&S'A' when all the new = strings are on and now tensioned up to about a M3 flat. I'm stripping = the old damper felts, with their magenta felt backing, and contemplating = the best method of trimming the new damper felts to the required oblique = angle. Any ideas out there? You know what happens if you don't approach = this right - you get a nasty wiggly un-acceptable cut. S&S did/does it = without this. so how is it done? Regards from a sunny Sussex village Michael G.(UK) ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/9f/05/51/46/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC