This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Problem found on newer K&C 600 (Samick) needing routine regulation after = break in period.=20 Found: Dip =3D 1/2" Blow =3D 2 1/8 Let off =3D 1/8" + Looks like hammers are over centering. Trying to put decent distances into play makes for strange hammer = setting, way too much aftertouch and still the question of possible = overcentering hammers. Hammers shanks at rest now look like they have a = very shallow angle from horizontal, Could it be the stack is simply too = low to start with? How does one check that or what do I need to know = before calling Samick? Is this where the magic line comes into play? = Anybody have the key bed to hammer flange pin height available? Any = suggestions welcome! Thank you, Joseph Alkana RPT ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/cd/bc/d0/bd/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC