At 8:02 AM -0500 9/7/05, Dean May wrote:
>I've only used the ones from Schaff. After I broke a couple I had them
>repaired by welding. We ran extra beads of welding around the perimeter
>of the socket in a couple of places to beef it up. So far it has lasted
>like 10 times longer but it is ugly.
Mine always broke up at the square drive socket end. Until I put a
hose clamp up there. Obviously there's no room for a hose clamp down
at the tuning pin socket end, but that isn't where the sockets fail
on me.
Bill Ballard RPT
NH Chapter, P.T.G.
"I gotta go ta woik...."
...........Ian Shoales, Duck's Breath Mystery Theater
+++++++++++++++++++++
This PTG archive page provided courtesy of Moy Piano Service, LLC