This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Heads and tips 20% #2 and #3 Joe Goss RPT Mother Goose Tools imatunr@srvinet.com www.mothergoosetools.com ----- Original Message -----=20 From: Horace Greeley=20 To: Pianotech=20 Sent: Sunday, September 11, 2005 4:01 PM Subject: Re: gots de shaft! Hi, Joe, At 02:04 PM 9/11/2005, you wrote: Hi, anyone with an old Hale hammer needing a shaft. While learning that one needs to measure and not take = someones' elses word <g> We now have a few 10" shafts that will fit the Hale extension = hammer. also 3/8" hex and 1/2" hex soon back in supply. The round variety, right? How much? Also, any chance for short = 15-degree heads and/or tips? Thanks very much. Best. Horace Joe Goss RPT Mother Goose Tools imatunr@srvinet.com www.mothergoosetools.com ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/bf/82/3c/1f/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC