This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hi Joe, I am not sure but there may have been different sizes of tips made for = the Hale hammer. I have one that is about a 3/8" hole, I have never = measured it or the thread size/ Joe Goss RPT Mother Goose Tools imatunr@srvinet.com www.mothergoosetools.com ----- Original Message -----=20 From: Joe Garrett=20 To: pianotech=20 Sent: Sunday, September 11, 2005 5:25 PM Subject: Re: gots de shapt! Horace said: "Also, any chance for short=20 15-degree heads and/or tips?"=20 Joe, How about tips that will FIT the Hale Hammer?!!! Also, Heads, ditto as = above. The last "Hale" tips and heads I got from "Shaft" didn't fit = worth a crap! :-( How's the new toy "rethink" progressing?<G> Joe Garrett, R.P.T. Captain, Tool Police Squares R I ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/9d/b2/d8/d5/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC