This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment If I'm seeking accuracy, after the calculation, I prefer to start at A4, then tune A3 to see if that critical octave is ok. Then tune down = through the bass unisons as you go with checks that can be done with one hand, = i.e., octave fifth, fourth, progressive thirds. Modify with the DOB on the = fly if you need to. Then tune up through the treble doing the same thing. =20 =20 David Love davidlovepianos@comcast.net=20 -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On = Behalf Of Robert Finley Sent: Monday, September 12, 2005 4:24 AM To: pianotech@ptg.org Subject: Best Tuning Strategy using SAT III =20 Until now I have been performing the FAC stretch calculation/analysis = using the SAT III on the piano and then began tuning chromatically from A0 upwards, tuning the single string unisons, and then the two and three = string unisons as I go along, using rubber mutes. I am wondering whether it = would be better to strip mute the piano, tune all the single strings, perform checks on the intervals and octaves, and then go back and tune all the unisons. =20 =20 What would you advise that would produce the best, most accurate and = fastest result? Thank you for your help.=20 =20 Robert Finley ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/fe/fd/9b/9d/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC