Catcher leather replacement

Piannaman@aol.com Piannaman@aol.com
Fri, 16 Sep 2005 22:24:41 EDT


---------------------- multipart/alternative attachment
 
Avery,
 
Thanks for the offer.  I think I'll stick with standard  buckskin.  I have 
bunches of scraps in the trunk of my car.
 
Thanks to Don and Michael for your responses.  Sounds like a piece o'  cake.
 
Dave Stahl
 
In a message dated 9/16/2005 3:08:22 PM Pacific Standard Time,  
avery1@houston.rr.com writes:

Dave,  

I believe I have several sets of those Corfam replacements that  Baldwin used 
to send out to replace those that went "percussion"! :-)  

Let me know if you'd like one and I'll check at work tomorrow. Or  maybe 
Monday, now! :-) 

Avery 

At 09:24 AM 9/16/05, you  wrote:

I'm working on an old upright that has many problems.  One of  them is that a 
couple of octaves worth of catcher leathers are not  there.  I hate to admit 
it, but I have not done this repair  before.  

I don't want to spend too much time on this, as  client's budget is limited 
(a professional musician..), so I was looking for  tips on replacing the 
missing leathers as quickly--and functionally as  possible.

Any suggestions are 



 

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/b8/25/f9/58/attachment.htm

---------------------- multipart/alternative attachment--

This PTG archive page provided courtesy of Moy Piano Service, LLC