This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Greg asked: " By "rails" I assume you mean action or key frame rails. I = have not=20 checked that. I'm not sure what you mean by remounting them. I think = they=20 sit flat on the keyframe. regards, Greg, I was referring to the Action Rails. Many times the Action brackets are = "shimmed". If this is the case, it may be possible to remove some of the = shimming from the middle bracket(s) footing and thereby making the = Action Rails "bow" downward enough to get decent clearance. If this is = done, some creative regulation will be needed, but it is doable.=20 The first thing I would do is put a straight edge on the hammer rail and = see if it is straight. Same with the wippen rail. Regards, Joe Garrett, R.P.T. Captain, Tool Police Squares R I ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/c3/3b/63/81/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC