This is a multi-part message in MIME format. ---------------------- multipart/mixed attachment ------=_NextPart_001_0002_01C5BD6F.CE1F3B60 This is the second try on this one, too! grrr! Made out of a scrap piece of P.B. Material. It has increments on the = side and lines on the top, (corresponding to the side). A Center pin and = a rounded notch for your finger. The trick is to JUST lay the tape on = the jig, i.e. don't stretch it. use a single edged razor blade or any = other cutting tool of your choice. The jig is held by a vise, so you can = have both hands free to do the insert/hold/cut. Joe Garrett, R.P.T. Captain, Tool Police Squares R I ------=_NextPart_001_0002_01C5BD6F.CE1F3B60 An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/b0/5f/99/0a/attachment.htm ------=_NextPart_001_0002_01C5BD6F.CE1F3B60-- ---------------------- multipart/mixed attachment A non-text attachment was scrubbed... Name: hphphp34.jpg Type: image/jpeg Size: 88745 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/29/fc/b8/96/hphphp34.jpg ---------------------- multipart/mixed attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC