Can you attach a couple of photographs? Del | -----Original Message----- | From: pianotech-bounces@ptg.org | [mailto:pianotech-bounces@ptg.org] On Behalf Of David B. Stang | Sent: September 23, 2005 1:25 PM | To: pianotech@ptg.org | Subject: Knabe craked plate | | Friends, | Here's another question about my 1900 Knabe 6'4 grand. The | plate is cracked. The cracks are in the two treble bars, and | just above the pinblock. I am planning to take it to a welder | whom I understand is the best qualified person to work on | piano plates in the state of Ohio. | However, I just read an article in the Journal (June '03) | written by B.M. Patchett, et.al., discussing a plate from a | mid-1800's Schiedmayer which was cracked in the same way as | mine. The authors made a bunch of measurements and created a | model of the stresses and came to the conclusion that the | plate would fail again even with the best welds in the world. | They ended up adding steel reinforcing bars to the tops of | the treble bars. Well, now I'm wondering if my Knabe is in | the same boat. Any wisdom ?? | | thanks. | David B. Stang | Columbus, Ohio | | | _______________________________________________ | pianotech list info: https://www.moypiano.com/resources/#archives |
This PTG archive page provided courtesy of Moy Piano Service, LLC