Hanging hammers the Norwegian way you see...! LOL ! but don't take the mickey out of his jig too much (some of us still want to see the pictures!!) :) Patrick > plies sost? tush pen? You've been in Norway too long...;-] > > I'm assuming you mean you mark the strike point of the old and new hammers > at the end of each section? What I like about Bill's is the block > against the shoulders...you can push up against it when aligning the > hammers...why couldn't you just extend Bill's jig to cover the entire > action...I wonder? Long block like you have for the tails to rest on. > a piece from one end to other for aligning the tails ala Bill's jig and a > long adjustable piece higher up for the shoulders to align next to...maybe > the set up would be time consuming especially when the old hammers to > match a straight line?...musings > > Does seem like a piece of white string against white hammers would make it > a bit hard to see the space? No problems though? > > David Ilvedson, RPT > Pacifica, California > > > > ----- Original message ---------------------------------------- > From: "Ric Brekne" <ricbrek@broadpark.no> > To: pianotech <pianotech@ptg.org> > Received: 1/19/2006 2:12:22 PM > Subject: HAMMER HANGING JIG, from spurlock > > >>Grin... Manjuanna... or however you spell that :) > >>Simple enough tho.... leftover peice of tuning block mounted on an >>adjustable height stand. Tails sit on the tuning block. A dark black >>tush pen has marked along the midpoint along one of the plies sost I >>have this very straight line for the tails and I have a string run >>across all the hammers at the middle of the shoulder. If a hammer is >>angled out with the tail on the line then the string deflects... if its >>angled in then you see a space between the string and hammer... Along >>with a good eyeball beed line.... well it works great and lasts a long >> time. > >>Cheers >>RicB > >>Ric, > >>Come on...you know you want to send us a photo...;-] > >>David Ilvedson, RPT >>Pacifica, California >>_______________________________________________ >>Pianotech list info: https://www.moypiano.com/resources/#archives > _______________________________________________ > Pianotech list info: https://www.moypiano.com/resources/#archives > Patrick Hinves Ballesta Afinador/Técnico 610442371 PIANISSIMO PIANOFORTE S.L.
This PTG archive page provided courtesy of Moy Piano Service, LLC