This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment John, That's interesting. I imagine you can make any handle for a tuning = lever if a person wanted to . The schaff lever I have now is great. I = can make smal smal movements with it. The practice pianos I do on = occasion, often have loose tuning pins, and having a lever where I can = make smal movements helps. Have a great night. =20 Marshall ----- Original Message -----=20 From: John Formsma=20 To: 'Pianotech List'=20 Sent: Tuesday, January 24, 2006 11:09 PM Subject: RE: Tuning Hammer Marshall, =20 Used the proper Forstner bit, clamped it into a vise and drilled a = hole with my drill press. Then, glued a thin piece of leather around the = inside of the hole to make it the correct size. Later, when it became = loose, I had to add a bit of card stock. I haven't done anything to it = in 3 years. =20 John Formsma =20 <<ps. I'm curious, how did you attach the wood ball from Hobby Lobby = to your lever? Marshall >> ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/41/6b/48/11/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC