This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Marshall, Used the proper Forstner bit, clamped it into a vise and drilled a hole with my drill press. Then, glued a thin piece of leather around the inside of the hole to make it the correct size. Later, when it became loose, I had to add a bit of card stock. I haven't done anything to it in 3 years. John Formsma <<ps. I'm curious, how did you attach the wood ball from Hobby Lobby to your lever? Marshall >> ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/ff/85/f8/db/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC