This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hello Dean. The damper wire diameter is .072. The largest piano wire I = have is #21 which is .047. Slightly smaller. Thanks for the thought tho. If I could just find someone with a couple (4) damper moldings with the = wires still in them, I could remove the wires and reuse the wires. Many regards, Gordon Holley Goshen, IN ----- Original Message -----=20 From: Dean May=20 To: 'Pianotech List'=20 Sent: Monday, January 30, 2006 1:32 PM Subject: RE: Damper Wire Source Can you get music wire in the right diameter? Just order a pound and = cut to length. Dean Dean May cell 812.239.3359 PianoRebuilders.com 812.235.5272 Terre Haute IN 47802 -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On = Behalf Of Gordon Holley Sent: Monday, January 30, 2006 10:36 AM To: Pianotech Subject: Damper Wire Source List. Schaff does not have any damper wires and doesn't know when = they will have any. The girl at Schaff suggested I call Renner (480-575-1700). Isn't = Renner located in Germany? I only need about 12 at the most. Sources for damper wire would be appreciated. =20 Gordon Holley Goshen, IN Indiana Chap 467 Associate Member ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/64/0f/5e/50/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC