String replacement under overstrung area

David Ilvedson ilvey at sbcglobal.net
Mon Jul 10 16:20:23 MDT 2006


That is true...still, I would prefer to get it out of the way...see you tomorrow afternoon

David Ilvedson, RPT
Pacifica, California






Original message
From: "David Love" 
To: "Pianotech List" 
Received: 7/10/2006 2:53:41 PM
Subject: RE: String replacement under overstrung area


You can usually just lean the action forward slightly to give clearance.  
 
David Love
davidlovepianos at comcast.net
www.davidlovepianos.com 
-----Original Message-----
From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of David Ilvedson
Sent: Monday, July 10, 2006 2:34 PM
To: pianotech at ptg.org
Subject: Re: String replacement under overstrung area
 
Easier is always better...I also don't like "bitching up" damper felts.  How long does it take to remove the action?   Less than minute ...YMMV

David Ilvedson, RPT
Pacifica, California






Original message
From: Farrell 
To: "Pianotech List" 
Received: 7/10/2006 1:59:40 PM
Subject: Re: String replacement under overstrung area
I don't find there to be any reason to remove the action for a tenor string replacement. Sure, it would be easier, but I don't think the small advantage is worth it.
 
YMMV
 
Terry Farrell
----- Original Message ----- 

 
Always good to make Dad feel useful...;-]   There is a stringing tool, which is basically a tube you slide the crimped string into.  I've heard a curtain rod also works.   Of course your removing the action...a long piece of brass rod with a notch in the end...once the string is in place use a clamp of some sort to hold it onto the hitchpin...vice grip works.   If nothing else the crimped wire will slide under the strings with a little *&^#%@.   You have to hold tension on the wires so they don't want to slide between strings...

David Ilvedson, RPT
Pacifica, California



Original message
Hi everyone.  I was tuning my mom’s ancient upright (1908) and of course a string broke.  Even worse, it was D#4 and in the area where the strings overlap.  While this was great stringing practice, I have to believe there’s a trick to getting the string where it needs to go (and stay there) without hours of heartache and assistance from my dad!  I felt like I was torturing this poor old piano.  Any words of wisdom?
 
Michelle Smith
Bastrop, Texas
 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060710/1f6d1100/attachment.html 


More information about the Pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC