Brass but plates

[Stephen Grattan]

Hi Julia,
   
  Schaff has a service that will duplicate those rails from either an old one or a pattern.  Give them a call for more info.
   
  Steve Grattan
  Lost Chord Clinic

KeyKat88 at aol.com wrote: 
      Greetings, 
   
              On an old upright, instead of flanges on the ends of the hammer butts there is a brass plate system of attatchment to the action rail. If the corners of the brass plate in the paino are broken off, can one replace the entire brass butt plate? In a shop, Are they easy to remake?How many hours would this job take?
   
   
  Julia Gottshall
  Reasding, PA

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060714/3e7a5f3b/attachment.html