Erratic Keypins

[Ron Nossaman]

> Any special recommendations for spacing the holes? Other than the 
> obvious - measure old and space accordingly..... Maybe there is some 
> sort of ultra-slick method (maybe not)?
> 
> Thanks.
> 
> Terry Farrell

Nothing slick, but will lazy do? Any chance of drilling the 
existing holes through, routing out and inlaying a strip of 
maple, and using the through holes from the back as guides to 
re-drill? With your overhead track pinblock drill, it 
shouldn't be a problem keeping everything square and accurate.

Ron N