Randy: I noticed your post this evening. I've been slowing hearing a little about what has happened to you recently. Are you now in California? I noticed you e-mail address is different. Sy ----- Original Message ----- From: John Fortiner To: Pianotech List Sent: Wednesday, July 26, 2006 7:47 PM Subject: Re: Bernard pattern grand hammerhead extractor Except for that appears to be a hammer stop on that pair, they resemble very closely a pair marketed by American Piano Supply when they were in business. John Fortiner On 7/26/06, John Delacour <JD at pianomaker.co.uk> wrote: A colleague of mine wants a hammerhead extractor such as one I bought years ago but can't remember where. The picture below gives an idea of what the tool is like, though the quality of the tool (marked 'Sargent') is far inferior to the fine original Bernard/Sargent tools. Nevertheless it does the job well. Can anyone tell me who now supplies this tool? Thanks. JD ------------------------------------------------------------------------------ No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/399 - Release Date: 7/25/2006 -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060726/491a6f5a/attachment-0001.html -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/png Size: 40777 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20060726/491a6f5a/attachment-0001.png
This PTG archive page provided courtesy of Moy Piano Service, LLC